6L Lab Sonicator Bath for Laboratory & Workshop | Variable Power Ultrasonic Cleaner with Sweep

This is a 6L high-end laboratory sonicator bath for dental lab sonicating and cleaning. The K360HTDP is the 6-liter entry in the variable power ultrasonic cleaners, offering 180W of adjustable ultrasonic output and a 300W heater in a tank sized for both lab glassware and small workshop parts. Its dual identity—precise enough for sample preparation, powerful enough for small parts degreasing. It is a popular choice for shared facilities where the machine serves multiple departments with varying cleaning requirements.

It is also a sweep frequency ultrasonic cleaner. The optimized generator circuit continuously fine-tunes the operating frequency around the 40kHz center, driving the industrial-grade transducers at their most efficient resonance point. The practical result: consistent cavitation energy across the entire 6-liter ultrasonic bath, no dead spots, and a transducer system that runs cooler and lasts longer. Whether you are cleaning delicate lab equipment or degreasing metal parts after machining, the K360HTDP delivers repeatable, effective results.

• 5–100% Adjustable Ultrasonic Power — Visible, stepless power control from gentle mixing to heavy-duty degreasing. No presets that limit your options.
• Automatic Sweep Frequency — The optimized circuit board continuously matches the generator output to the transducer resonance, maintaining peak cleaning efficiency throughout every cycle.
• Digital Control with Timer & Heater — Set time from 1 to 99 minutes or switch to continuous run mode. Temperature adjustable from 0 to 100°C with digital thermostat accuracy.
• 180W Ultrasonic Output — Industrial-grade transducers convert electrical energy into strong mechanical cavitation, effective across the full 300x155x150mm tank.
• High-Grade Stainless Steel Construction — Both the housing and the sonication bath are fabricated from corrosion-resistant stainless steel, built to withstand daily exposure to cleaning solutions and solvents.

This lab sonicator bath has a wide range of applications. It is ideal for both laboratory instruments and industrial parts cleaning. Specifically, there are applications as follows:

• Sample Sonication — Gentle mixing, dissolution assistance, and degassing at 20–50% power
• Lab Equipment Cleaning — Tubes, beakers, flasks, pipettes, and glassware at 40–60% power
• Dental Lab Work — Sonicating models, cleaning impression trays, and prosthetic components
• HPLC Solvent Preparation — Degas mobile phase with continuous run mode and sweep function

• Dental Clinics — Dentures, scalers, forceps, elevators, and small instrument cleaning
• Medical Instruments — Pre-sterilization ultrasonic cleaning of hinged instruments and lumened tools
• Veterinary Practices — Mixed instrument loads between procedures

• Jewellery & Eyeglass Shops — Restore shine and remove polishing residues at low power
• Automotive Parts — Fuel injectors, carburetors, DPF components, and small engine parts at high power
• PCB & Electronics — Flux removal from circuit boards after soldering and rework
• Industrial Parts Washing — Removing dust, wax, and oil from machined metal components

What’s Included

• K360HTDP 6L ultrasonic cleaner
• Stainless steel cleaning basket
• Stainless steel lid
• Power cable

Parameter	Specification
Model	K360HTDP
Volume	6 Liters
Ultrasonic Power	180W (5–100% adjustable)
Frequency	40kHz with Sweep Function
Heating Power	300W
Temperature Range	0–100°C
Timer	1–99 min or continuous running
Internal Tank Size	300 x 150 x 150 mm
Overall Size	330 x 180 x 310 mm
Carton Box Size	430 x 270 x 410 mm
Gross Weight	6.4 kg

All are 6-liter ultrasonic bath sonicators with various functions such as mechanical knob control, adjustable power, sweep frequency, and multiple cleaning modes – Same volumes, same specifications, different functions.

The volumes of the ultrasonic cleaner vary with 3L, 4L, 6L, 10L, 15L, 20L, and 30L. Before buying a lab sonicator bath, you may check the best capacity for your needs.

Variable Power Ultrasonic Cleaner: One Machine, Many Jobs

The K360HTDP ultrasonic bath sonicator genuinely serves laboratory and workshop users equally well. In the morning, it might run a 30% power cycle to prepare samples for an assay. In the afternoon, the same machine at 90% power and 70°C degreases a batch of machined components. No other series in this size class offers the same combination of precise low-end control and high-end power, bridged by the sweep frequency that ensures consistent results regardless of where items sit in the tank.

6 Liter Ultrasonic Cleaner Bath Showing

FAQs:

Q: Can this ultrasonic bath replace a dedicated lab sonicator for sample preparation?

For many routine sample preparation tasks—mixing, dissolution assistance, and gentle degassing—the K360HTDP 6L lab sonicator bath performs well at 20–50% power. For applications requiring precise energy delivery in joules or watts per milliliter, an ultrasonic cleaner with energy monitoring may be more appropriate. The K360HTDP excels at batch sonication of multiple samples in tubes or vials when placed in a floating rack.

Q: How does the continuous run mode work?

When set to continuous mode, the ultrasonic cleaning runs until manually stopped. This is useful for extended degassing of large solution batches, prolonged soaking cycles, or protocols that exceed the standard 99-minute timer limit. The LED display tracks elapsed time in this mode for your reference.

Q: Is the stainless steel tank resistant to cleaning chemicals?

The high-grade stainless steel tank and housing are resistant to most common water-based cleaning solutions, detergents, and mild solvents. Avoid prolonged contact with strong acids, chlorides, and bleach-based solutions, which can pit stainless steel over time. For specialized cleaning chemistries, consult the chemical compatibility chart in the user manual.