10L Portable Ultrasonic Washer for Surgical Instruments | Touchscreen Multipurpose Lab Sonicator

The K410HTDF is the 10-liter portable ultrasonic washer specifically positioned for surgical instrument cleaning. It is the touchscreen multipurpose ultrasonic cleaner combining 240W of power, a 500W heater, and LCD-controlled mode selection in a portable benchtop format. It is a multipurpose ultrasonic washer for surgical instrument cleaning in clinics, minor surgery centers, and veterinary practices where instrument throughput demands a 10L capacity and the cleaning protocols require documented, repeatable cycles. The word “portable” is not marketing language—the integrated generator and recessed side handles make this ultrasonic washer practical to relocate between treatment rooms or from a clean zone to a soiled zone as workflow requires.

• Portable Design with Integrated Generator — No separate generator box; the entire ultrasonic cleaning system is contained within the main housing. Side handles for a two-person lift.
• LCD Touchscreen Control — Mode selection, temperature, time, and degas all on one visual interface.
• 240W Ultrasonic Power — Strong cavitation for effective bioburden removal from surgical instruments.
• Four Cleaning Modes — Gentle for delicate ophthalmic instruments; Strong for stainless steel forceps and retractors; Pulse for hinged instruments; Normal for routine loads.
• Degas Function — Essential for cleaning instruments with box joints and lumens where trapped air would otherwise shield contaminants.
• 500W Heater (0–100°C) — Rapid heating for clinical throughput.

• Surgical Instrument Reprocessing — A general ultrasonic instrument washer for forceps, scissors, needle holders, retractors, and clamps.
• Ophthalmic Instruments — Gentle mode for delicate eye surgery tools.
• Dental Clinic — Handpieces (where manufacturer-approved), forceps, elevators, and scalers.
• Veterinary Practice — Mixed instrument loads processed between procedures.

What’s Included

• K410HTDF 10L ultrasonic washer
• Stainless steel cleaning basket
• Stainless steel lid
• Power cable

Parameter	Specification
Model	K410HTDF
Volume	10 Litres
Ultrasonic Power	240W
Frequency	40kHz with Sweep Function
Heating Power	500W
Temperature Range	0–100°C
Timer	1–99 min
Cleaning Modes	Normal, Gentle, Strong, Pulse
Features	LCD touchscreen, Degas, Sweep frequency, Portable design
Internal Tank Size	300 x 240 x 150 mm
Overall Size	330 x 270 x 320 mm
Carton Box Size	430 x 350 x 410 mm
Gross Weight	9.0 kg

Try more ultrasonic parts washers with various functions such as mechanical knob control, adjustable power, sweep frequency, and multiple cleaning modes – Same volumes, same specifications, different functions.

More LCD Display multifunctional ultrasonic washers that vary from 3 liters to 30 liters for your choice. Check if the internal tank size is available for your cleaning items.

Explore More Multipurpose Series

A typical instrument reprocessing cycle with the K410HTDF 10L ultrasonic washer for surgical instruments follows a logical sequence. Load the instruments into the cleaning basket. If the solution is freshly poured, tap the Degas button and let the automated cycle run. Once degassed, select the appropriate cleaning mode based on the instrument types in the load. Set the temperature—typically 40–60°C for enzymatic or detergent solutions—and the timer. The cycle runs, the display counts down, and the instruments emerge with cavitation-cleaned hinges, serrations, and surfaces that manual scrubbing would have missed. The documented time, temperature, and mode provide a record for infection control auditing.

FAQ

Q: Is this unit compliant with surgical instrument cleaning standards?

The K410HTDF provides the ultrasonic cleaning step that is recommended in standards for reusable surgical instrument reprocessing. The digital display documents cycle parameters—mode, temperature, and time—which supports record-keeping requirements. The degas function ensures cavitation penetrates into instrument joints and box locks where bioburden accumulates. Always use a validated cleaning solution and follow your facility’s complete reprocessing protocol, including subsequent rinsing, drying, and sterilization steps.

Q: How portable is it in practice?

The unit weighs 9 kg dry and has recessed handles on both sides. One person can carry it short distances when empty. When the tank is full (10L of solution adds approximately 10 kg), a two-person lift is recommended. The integrated design—no separate generator box—means you are moving one unit, not two. The power cord wraps into a rear cable management slot for transport.